Sales Hotline -- 01482 -- 328150 --

[Hornady] .22 Cal .224" 50 gr V-MAX (x100 Box)

£34.95

  • UPC/EAN:PLU 0435
Calibre :
22 Cal. 224"
Product Line : V-MAX
Sectional Density : .142
Ballistic Coefficient : .242 (G1)
Twist Rate : N/A
Weight : 50 GR
Application : Varmint <50 lbs
Box Count : 100
 Description: 

With its combination of proven materials, innovative design and streamlined profile, the Hornady® V-MAX® represents the pinnacle of what a specialized varmint bullet can achieve, offering straight-line trajectories, enhanced accuracy, dramatic expansion and explosive fragmentation at a wide range of distances and velocities.

The industry's leading varmint bullet with polymer tip and streamlined design results in flat trajectories. The concentricity of the match grade AMP® bullet jacket provides maximum accuracy at all ranges as well as explosive expansion, even at velocities as low as 1600 fps.

Product Features :

  • Polymer Tip

The secret to the explosive terminal performance of the V-Max® is a hollow cavity resting between the tip's shaft and the body of the bullet. Upon impact, the hard shaft builds up speed and energy before driving into the core, causing the entire package to rapidly expand to the point of violent fragmentation, even at low terminal velocities.

  • Higher Ballistic Coefficient

Hornady® combines the sharp, pointed polymer tip with the most aerodynamic profile for a high ballistic coefficient. The V-MAX® profile also provides the maximum bearing surface for added in-flight stability.

  • Swaged Lead Core

The swaging process allows precise formation of the core up and around the tip, with a cavity under the tip's stem. This allows the tip to build up energy before smashing into the core, causing dramatic fragmentation of the core and jacket.

  • Precise Boattail & Flatbase Designs

Utilizing the proper base design provides incredible in-flight stability for long-range shooting.

!WARNING!

Reloading cartridges can be dangerous. Incorrectly reloaded cartridges can result in damage and personal injury. In some countries, formal training is required. Even in countries without such legal requirements, we recommend attending such a course. As the propellant powder is outside of our control and oversight once it leaves our factory, we refuse all liability for any damages that may result. The manufacturer shall only be liable in the event of intent or gross negligence.

Cartridge reloading should always be performed with the necessary respect for the explosive material. Attention to details and careful, precise working help to increase safety. In particular, mistakes in the powder type or double loads can result in severe problems.

Always observe the following basic rules:

I. Never start with the specified maximum charge. The process should always begin with a starting charge and then develop in the direction of the maximum charge until the desired shooting result is attained.

II. Never exceed the maximum charge published by Nitrochemie Wimmis AG. High pressures can damage or destroy your weapon.

III. Stop shooting your self-loaded cartridges immediately if you see signs of excessive pressure.

IV. Never mix propellant powders. This applies for all brands and types.

V. Never use propellant powder in black powder firearms. Smokeless propellant powders produce significantly greater pressures than black powder.

The reloading of ammunition entails components from other manufacturers. A number of parameters must be observed. The equipment used must be in perfect working order. Nitrochemie Wimmis AG has no control over these processes and thus expressly refuses any liability for damage that may occur due to reloading or in the use of corresponding components and ammunition.

Reloading is always performed at your own risk!

MANUFACTURERS SKU: 22261

Manufacturers