[Phillips Game Technology] Gun Bluing Profesional Cold Blue 250m

Gun Bluing Profesional Cold Blue for guns, screws & metal accessories. Dilutes 1 part solution to 3 parts water.

A very simple but cheap way to re-blue shotgun and rifle barrels. Simply degrease all the parts you wish to re-blue, wire wool any rust away and then place in a shallow trough and mix with tap water. Totally immerse the parts and ensure they are totally covered by the liquid. Frequently brush the surface of the metal with short strokes. The metal surface will darken first bronze then blue then a very dark blue. This will take about 3 minutes. When the desired colour has been reached simply remove wash thoroughly then immediatly spray with gun oil. Thats it Its that simple. Dont pay a fortune to a gun smith have a go yourself, you will be amazed at the results. Deeply penetrates and bonds with the metal- No need for special, expensive equipment. No special skills required to use. No need to send your gun away to be blued. An entire gun can be re-blued, virtually in minutes. Gives professional results, ideal for the amateur under cold conditions. For re-bluing trigger guards, top levers and barrels. The parts must be completely degreased with a non oily solvent such as Phillips Gun Degreaser. Any traces of rust should be removed with steel wool and gun degreaser. Once degreased the parts must not be touched by hand as grease from the skin will leave marks.Phillips Cold Blue should be poured into a shallow trough made of plastic or glass and diluted with tap water, one part Blue plus three parts water. Immerse the parts in the trough and ensure they are totally covered by liquid. Use a small paint brush, about half an inch wide, to wipe over the surface of the metal with short strokes. The metal will slowly darken through bronze colours and blue to a very dark blue. This will take about three minutes . Screws and other small parts will only need an occassional brush over. Remove the parts and rinse in water thoroughly. Spray the wet parts immediately with Phillips Water Repellent Oil and leave for the Blue to harden for at least one hour. Wipe over with a soft cloth and spray over with Phillips Silicone Airgun Oil.